A
-
Abbasi, M.
Dye removal from water by zinc ferrite-graphene oxide nanocomposite [Volume 11, Issue 2, 2018, Pages 85-92]
-
Ahmadi, H.
Evaluating the Role of antioxidants in the stabilization of hydroxypropyl cellulose by ATR-FTIR Spectroscopy [Volume 11, Issue 2, 2018, Pages 93-101]
-
Ahmadi Moghaddam, H.
Dispersion and Nonlinearity in Ultra-Optical Ga2O3 and TiO2-Bi2O3-PbO Glass Systems [Volume 11, Issue 3, 2018, Pages 179-191]
-
Aliakbari, M.
Assessing the Effect of Nylon 66 and Alumina on Mechanical and Thermal Properties of Epoxy-based Adhesives Through Taguchi Experimental Design Analysis [Volume 11, Issue 3, 2018, Pages 149-164]
-
Arjmandi, S.A.
Dye removal from water by zinc ferrite-graphene oxide nanocomposite [Volume 11, Issue 2, 2018, Pages 85-92]
-
Ashrafi, N.
Dyeing Properties and Color Fabrics Using Natural Dye and Mordant [Volume 11, Issue 2, 2018, Pages 79-83]
-
Ataeefard, M.
Investigation the effect of substrate photo-electrode based on screen method on performance of dye-sensitized solar cells [Volume 11, Issue 1, 2018, Pages 47-54]
B
-
Balashabadi, P.
Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings [Volume 11, Issue 3, 2018, Pages 129-135]
-
Benayoun, S.
Scratch Resistance of Paints Degraded by Arid Saharan Environments [Volume 11, Issue 4, 2018, Pages 233-240]
-
Bhowal, A.
Comparison of dyeing of polyester fibers with natural dye and bio-mordant [Volume 11, Issue 3, 2018, Pages 165-172]
D
-
Dadashian, F.
Acid Dyes Removal from textile wastewater using waste cotton activated carbon: Kinetic, isotherm, and thermodynamic studies [Volume 11, Issue 1, 2018, Pages 9-20]
-
Datta, S.
Comparison of dyeing of polyester fibers with natural dye and bio-mordant [Volume 11, Issue 3, 2018, Pages 165-172]
-
Dehghan Banadaki, R.
Synthesis of Fe-Doped Titanite and Quasi-Titanite Structures and Studying the Effect of Doping on Physical and Optical Properties [Volume 11, Issue 4, 2018, Pages 221-231]
-
Didehban, Kh.
The Effect of Polyethylene Glycol and Nanoclay on the Rheological Behavior of Dispersing Cationic Polyurethane Nanocomposites [Volume 11, Issue 1, 2018, Pages 33-46]
-
Didehban, Kh.
High-performance starch-modified graphene oxide/epoxy nanocomposite coatings: A glimpse at cure kinetics and fracture behavior [Volume 11, Issue 1, 2018, Pages 55-62]
-
Dodangeh, M.
The Synthesis of Poly(amidoamine) Dendrimer: Dyeing and Fluorescence Properties [Volume 11, Issue 3, 2018, Pages 173-178]
E
-
Ekrami, E.
Acid Dyes Removal from textile wastewater using waste cotton activated carbon: Kinetic, isotherm, and thermodynamic studies [Volume 11, Issue 1, 2018, Pages 9-20]
G
-
Ghanadzadeh Gilani, A.
Study of Environment and pH Effects on the Spectral Behavior of Arylazobenzylidene Dyes [Volume 11, Issue 2, 2018, Pages 69-78]
-
Gharanjig, K.
Investigation the effect of substrate photo-electrode based on screen method on performance of dye-sensitized solar cells [Volume 11, Issue 1, 2018, Pages 47-54]
-
Gharanjig, K.
Dyeing Properties and Color Fabrics Using Natural Dye and Mordant [Volume 11, Issue 2, 2018, Pages 79-83]
-
Gharanjig, K.
The Synthesis of Poly(amidoamine) Dendrimer: Dyeing and Fluorescence Properties [Volume 11, Issue 3, 2018, Pages 173-178]
-
Ghobadi Jola, B.
The Effect of Polyethylene Glycol and Nanoclay on the Rheological Behavior of Dispersing Cationic Polyurethane Nanocomposites [Volume 11, Issue 1, 2018, Pages 33-46]
-
Golestani, Gh.
A New Polymeric Nanocomposite Coating for Corrosion Protection of Carbon Steel in HCl Solution [Volume 11, Issue 1, 2018, Pages 1-8]
-
Grayeli Korpi, A.R.
Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings [Volume 11, Issue 3, 2018, Pages 129-135]
H
-
Habibi, M.
Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings [Volume 11, Issue 3, 2018, Pages 129-135]
-
Hamidi, A.
Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings [Volume 11, Issue 3, 2018, Pages 129-135]
-
Hosseini-Zori, M.
Synthesis, Characterization and Investigation of Photocatalytic Activity of transition metal-doped TiO2 Nanostructures [Volume 11, Issue 4, 2018, Pages 209-220]
-
Hosseinnezhad, M.
Investigation the effect of substrate photo-electrode based on screen method on performance of dye-sensitized solar cells [Volume 11, Issue 1, 2018, Pages 47-54]
-
Hosseinnezhad, M.
Dyeing Properties and Color Fabrics Using Natural Dye and Mordant [Volume 11, Issue 2, 2018, Pages 79-83]
-
Hosseinnezhad, M.
The Synthesis of Poly(amidoamine) Dendrimer: Dyeing and Fluorescence Properties [Volume 11, Issue 3, 2018, Pages 173-178]
-
Hosseinnezhad, M.
Investigation of Photovoltaic Properties of 1,8-Naphthalimide Dyes in Dye-sensitized Solar Cells [Volume 11, Issue 4, 2018, Pages 253-258]
I
-
Imani, H.
Dyeing Properties and Color Fabrics Using Natural Dye and Mordant [Volume 11, Issue 2, 2018, Pages 79-83]
J
-
Jafari, R.
The Dependency of Colorimetric Characteristics of Black Fabrics to the Whiteness Attribute of Substrate [Volume 11, Issue 2, 2018, Pages 113-122]
-
Jouyandeh, M.
Epoxy Coatings Physically Cured with Hydroxyl-contained Silica Nanospheres and Halloysite nanotubes [Volume 11, Issue 4, 2018, Pages 199-207]
K
-
Karami, H.
Dye removal from water by zinc ferrite-graphene oxide nanocomposite [Volume 11, Issue 2, 2018, Pages 85-92]
-
Karami, Z.
Effect of Carbon Black Content on Curing Behavior of Polysulfide Coatings [Volume 11, Issue 2, 2018, Pages 103-112]
-
Khajeh Aminian, M.
Synthesis of Fe-Doped Titanite and Quasi-Titanite Structures and Studying the Effect of Doping on Physical and Optical Properties [Volume 11, Issue 4, 2018, Pages 221-231]
-
Khajeh Mehrizi, M.
Dyeing Properties and Color Fabrics Using Natural Dye and Mordant [Volume 11, Issue 2, 2018, Pages 79-83]
-
Khajenoori, S.
Synthesis and Investigation on Viscoelastic Properties of Urethane Acrylate- Polyaniline [Volume 11, Issue 4, 2018, Pages 241-252]
-
Koochakzaei, A.
Evaluating the Role of antioxidants in the stabilization of hydroxypropyl cellulose by ATR-FTIR Spectroscopy [Volume 11, Issue 2, 2018, Pages 93-101]
M
-
Madaoui, Z.
Scratch Resistance of Paints Degraded by Arid Saharan Environments [Volume 11, Issue 4, 2018, Pages 233-240]
-
Malek, M.
Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings [Volume 11, Issue 3, 2018, Pages 129-135]
-
Mallakpour, S.
Evaluating the Role of antioxidants in the stabilization of hydroxypropyl cellulose by ATR-FTIR Spectroscopy [Volume 11, Issue 2, 2018, Pages 93-101]
-
Mendas, M.
Scratch Resistance of Paints Degraded by Arid Saharan Environments [Volume 11, Issue 4, 2018, Pages 233-240]
-
Mirshokraie, A.
The Effect of Polyethylene Glycol and Nanoclay on the Rheological Behavior of Dispersing Cationic Polyurethane Nanocomposites [Volume 11, Issue 1, 2018, Pages 33-46]
-
M. larijani, M.
Effect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings [Volume 11, Issue 3, 2018, Pages 129-135]
-
Moallem, M.
Assessing the Effect of Nylon 66 and Alumina on Mechanical and Thermal Properties of Epoxy-based Adhesives Through Taguchi Experimental Design Analysis [Volume 11, Issue 3, 2018, Pages 149-164]
-
Mohammadi, A.
Study of Environment and pH Effects on the Spectral Behavior of Arylazobenzylidene Dyes [Volume 11, Issue 2, 2018, Pages 69-78]
-
Mohammadian, J.
Synthesis and Investigation on Viscoelastic Properties of Urethane Acrylate- Polyaniline [Volume 11, Issue 4, 2018, Pages 241-252]
-
Moini Jazani, O.
Effect of Carbon Black Content on Curing Behavior of Polysulfide Coatings [Volume 11, Issue 2, 2018, Pages 103-112]
-
Moini Jazani, O.
Assessing the Effect of Nylon 66 and Alumina on Mechanical and Thermal Properties of Epoxy-based Adhesives Through Taguchi Experimental Design Analysis [Volume 11, Issue 3, 2018, Pages 149-164]
-
Moini Jazani, O.
Epoxy Coatings Physically Cured with Hydroxyl-contained Silica Nanospheres and Halloysite nanotubes [Volume 11, Issue 4, 2018, Pages 199-207]
-
Mokhtari shourijeh, Z.
Synthesis, Characterization and Investigation of Photocatalytic Activity of transition metal-doped TiO2 Nanostructures [Volume 11, Issue 4, 2018, Pages 209-220]
-
Moradian, S.
Investigation the effect of substrate photo-electrode based on screen method on performance of dye-sensitized solar cells [Volume 11, Issue 1, 2018, Pages 47-54]
N
-
Navarchian, A.H.
Effect of Carbon Black Content on Curing Behavior of Polysulfide Coatings [Volume 11, Issue 2, 2018, Pages 103-112]
-
Navarchian, A.H.
Epoxy Coatings Physically Cured with Hydroxyl-contained Silica Nanospheres and Halloysite nanotubes [Volume 11, Issue 4, 2018, Pages 199-207]
R
-
Razani, N.
Dyeing Properties and Color Fabrics Using Natural Dye and Mordant [Volume 11, Issue 2, 2018, Pages 79-83]
-
Riazi, M.
Study of Environment and pH Effects on the Spectral Behavior of Arylazobenzylidene Dyes [Volume 11, Issue 2, 2018, Pages 69-78]
-
Rouhani, Sh.
Investigation the effect of substrate photo-electrode based on screen method on performance of dye-sensitized solar cells [Volume 11, Issue 1, 2018, Pages 47-54]
S
-
Sadeghi-Kiakhani, M.
Salt-free dyeing of cotton fabric modified with prepared chitosan-poly propylene imine dendrimer using direct dyes [Volume 11, Issue 1, 2018, Pages 21-32]
-
Sadighian, S.
Dye removal from water by zinc ferrite-graphene oxide nanocomposite [Volume 11, Issue 2, 2018, Pages 85-92]
-
Saeb, M.R.
High-performance starch-modified graphene oxide/epoxy nanocomposite coatings: A glimpse at cure kinetics and fracture behavior [Volume 11, Issue 1, 2018, Pages 55-62]
-
Saeb, M.R.
Effect of Carbon Black Content on Curing Behavior of Polysulfide Coatings [Volume 11, Issue 2, 2018, Pages 103-112]
-
Saeb, M.R.
Epoxy Coatings Physically Cured with Hydroxyl-contained Silica Nanospheres and Halloysite nanotubes [Volume 11, Issue 4, 2018, Pages 199-207]
-
Safapour, S.
Salt-free dyeing of cotton fabric modified with prepared chitosan-poly propylene imine dendrimer using direct dyes [Volume 11, Issue 1, 2018, Pages 21-32]
-
Salehi, R.
Acid Dyes Removal from textile wastewater using waste cotton activated carbon: Kinetic, isotherm, and thermodynamic studies [Volume 11, Issue 1, 2018, Pages 9-20]
-
Sen, A.
Comparison of dyeing of polyester fibers with natural dye and bio-mordant [Volume 11, Issue 3, 2018, Pages 165-172]
-
Shabanian, M.
High-performance starch-modified graphene oxide/epoxy nanocomposite coatings: A glimpse at cure kinetics and fracture behavior [Volume 11, Issue 1, 2018, Pages 55-62]
-
Shahidi, M.
A New Polymeric Nanocomposite Coating for Corrosion Protection of Carbon Steel in HCl Solution [Volume 11, Issue 1, 2018, Pages 1-8]
-
Shahidi, M.
Investigating the Effect of Penicillin G as Environment-friendly Corrosion Inhibitor for Mild Steel in H3PO4 Solution [Volume 11, Issue 3, 2018, Pages 137-147]
-
Shaki, H.
Investigation of Photovoltaic Properties of 1,8-Naphthalimide Dyes in Dye-sensitized Solar Cells [Volume 11, Issue 4, 2018, Pages 253-258]
-
Shirkavand Hadavand, B.
The Effect of Polyethylene Glycol and Nanoclay on the Rheological Behavior of Dispersing Cationic Polyurethane Nanocomposites [Volume 11, Issue 1, 2018, Pages 33-46]
-
Shirkavand Hadavand, B.
Synthesis and Investigation on Viscoelastic Properties of Urethane Acrylate- Polyaniline [Volume 11, Issue 4, 2018, Pages 241-252]
-
Sohrabian, M.
Assessing the Effect of Nylon 66 and Alumina on Mechanical and Thermal Properties of Epoxy-based Adhesives Through Taguchi Experimental Design Analysis [Volume 11, Issue 3, 2018, Pages 149-164]
-
Soltaninejad, F.
Investigating the Effect of Penicillin G as Environment-friendly Corrosion Inhibitor for Mild Steel in H3PO4 Solution [Volume 11, Issue 3, 2018, Pages 137-147]
V
-
Vaselnia, S.Y.
Synthesis of Fe-Doped Titanite and Quasi-Titanite Structures and Studying the Effect of Doping on Physical and Optical Properties [Volume 11, Issue 4, 2018, Pages 221-231]
Y
-
Yarahmadi, E.
High-performance starch-modified graphene oxide/epoxy nanocomposite coatings: A glimpse at cure kinetics and fracture behavior [Volume 11, Issue 1, 2018, Pages 55-62]
Z
-
Zahloul, H.
Scratch Resistance of Paints Degraded by Arid Saharan Environments [Volume 11, Issue 4, 2018, Pages 233-240]
Your query does not match with any item