Corrosion Protection Performance of Nanoclay-Polyester Nanocomposite Coatings

Journal: Vol.9, No.4, autumn 2016 - Article 2   Pages :  223 Until 232

Article Code:

A. Golgoon: Tarbiat modares university - Department of Materials Engineering
M. Aliofkhazraei: Tarbiat Modares University - Department of Materials Engineering
M. Toorani: Tarbiat modares university - Department of Materials Engineering
A. R. Sabour Rouhaghdam: Tarbiat modares university - Department of Materials Engineering

Article's abstract:

In this paper, polymer-based nanocomposites powder were applied on the surface of plain carbon steel by electrostatic device and then were cured by microwave. The effect of adding nanoparticles on the corrosion resistance properties of the coatings was investigated by Electrochemical Impedance Spectroscopy and immersion test in 3.5 NaCl solution. Coatings structure and morphology of nanoparticles were investigated by scanning electron microscopy and transmission electron microscopy. The results of Electrochemical Impedance Spectroscopy and immersion test show that the corrosion resistance of the coating is increased significantly more than 10 time, by adding nanoclay because of barrier properties of nanoparticles. Also Embedding Nanoparticles in polyester coating fabricated a denser coatings, more uniform and less pores in comparison with the pure polyester coatings. Surface roughness of coated samples were showed more roughness for nanocomposite coatings.

EIS, Electrostatic, Nanocomposite, Nanoclay, Immersion test.

[1] B. Ramezanzadeh, M. M. Attar, An evaluation of the corrosion resistance and adhesion properties of an epoxy-nanocomposite on a hot-dip galvanized steel (HDG) treated by different kinds of conversion coatings, Surf Coatings Technol, vol. 205, no. 19, pp. 4649–4657, 2011. [2] M. Erbil, M. Özcan, EIS study of the effect of high levels of SO 2 on the corrosion of polyester-coated galvanised steel at different relative humidities, vol. 44, pp. 279–285, 2002. [3] K. Dastoori, B. Makin, and J. Telford, Measurements of thickness and adhesive properties of electrostatic powder coatings for standard and modified powder coating guns, J Electrostat, vol. 51, pp. 545–551, 2001. [4] R. Naderi, M. M. Attar, and M. H. Moayed, EIS examination of mill scale on mild steel with polyester–epoxy powder coating, Prog Org Coatings, vol. 50, no. 3, pp. 162–165, 2004. [5] X. Shi, T. A. Nguyen, Z. Suo, Y. Liu, and R. Avci, Effect of nanoparticles on the anticorrosion and mechanical properties of epoxy coating, Surf Coatings Technol, vol. 204, no. 3, pp. 237–245, 2009. [6] M. G. Hosseini, M. Jafari, and R. Najjar, Surface

Article's file
Page view: 2724
Article's download quantity : 37

Article System Login

Prof. Zahra Ranjbar
Dr. Farahnaz Nourmohammadian
Assistant Editor:
Dr. Mozhgan Hosseinnezhad
ISSN (online):
Institute for Color Science and Technology (ICST)

Quick Access
What is your opinion about the manuscript subscription system of PCCC website?
Website Statistics
Page view:2,725
Online Visitors:3