Study the curing behavior and mechanical properties of Pigmented UV curable epoxy acrylate monomers


Journal: Vol.7, No.4, autumn 2014 - Article 2   Pages :   Until 



Article Code:
PCCC-23-04-2013-237

Authors:
Pooneh Kardar: Institute for Color Science and Technology - Surface Coating and Corrosion Department
Morteza Ebrahimi: Amirkabir University of Technology - Polymer Engineering and Color Technology Departmen
Saeid Bastani: Institute for Color Science and Technology - Surface Coating and Corrosion Department


Article's abstract:

The formulations contained different acrylate monomer with different structure and functionalities and TiO2, were applied to obtain pigmented acrylic films by UV exposure. The conversion and mechanical characteristic were correlated. The results showed that there is a significant interaction between pigment, reactive diluents’ type and mechanical properties of coatings. It seems that cured films containing Isobornyl acrylate IBOA are claimed to have good flexibility, even though to obtain higher hardness and Tg, higher functionality such as dipentaerythritol pentaacrylate DIPEPA and dipentaerythritol hexaacrylate DPHAis needed. The Tg of the acrylate formulations increased with increasing functionality of monomer and the similar trends can be adopted for the hardness.


Keywords:
UV curable formulations, Pigmented coatings, Curing, Reactive diluents, Epoxy acrylate, Mechanical properties

References:

English References:
1. J. V. Crivello, K. Dietliker, Photopolymerisation for free radical, cationic and anionic photopolymer-isation, John Wily and Sons Inc., London, 1998.#2. C. G. Roffey, Photopolymerisation of surface coatings, John Wily and Sons Inc., Chichester, 1982.#3. V. Koleske, Radiation curing of coating, ASTM International, U.S.A., 2002.#4. D. C. Neckers, W. Jager, Photoinitiation for polymerisation: UV & EB at the millennium, John Wily and Sons Inc., London, 1998.#5. G. Webster, Prepolymers and reactive diluents, John Wily and Sons Inc., London, 1997.#6. P. Nylen, W. Sunderland, Modern surface coatings, Willey/ Interscience, London, 1965.#7. C. Decker, K. Zahouily, D. Decker, T. Nguyen, T. Viet, Performance analysis of acylphosphine oxide in photoinitiated polymerization, Polymer, 42(2001), 7551-7560.#8. L. Macarie, G. Ilia, S. Iliescu, A. Popa, N. Plesu, A. Pascariu, Photopolymerisable formulations for enhanced properties of pigmented films, Plast. Rubber Compos., 37(2008), 258-262.#9. D. L. Safranski, Effect of chemical structure and crosslinking density on the thermo-mechanical properties and toughness of (metha)crylate shape-memory polymer networks, M. Sc. thesis, Georgia Institute of Technology, USA, 2008.#10. H. Tobita, K. Lto, Computer simulation of network formation in free-radical crosslinking copolymer-ization, Polym. Gels Networks, 2(1994), 191-204.#11. J. E. Elliot, C. N. Bowman, Monomer functionality and polymer network formation, Macromolecules, 34(2001), 4642-4649.#12. P. Peters, V. M. Litvinov, P. Steeman, A. A. Dias, Y. Mengerink, R. Van Benthem, C. G. De Koster, S. J. Van Der Wal, P. Schoenmakers, Characterisation of UV-cured acrylate networks by means of hydrolysis followed by aqueous size-exclusion combined with reversed-phase chromatography, J. Chromatogr. A, 1156(2007), 111-123.#13. P. A. M. Steeman, A. A. Dias, D. Wienke, T. Zwartkruis, Polymerization and network formation of UV-curable systems monitored by hyphenated real-time dynamic mechanical analysis and near-infrared spectroscopy, Macromolecules, 37(2004), 7001-7007.#14. I. Alig, P. A. M. Steeman, D. Lellinger, A. A. Dias, D. Wienke, Polymerization and network formation of UV-curable materials monitored by hyphenated real-time ultrasound reflectometry and near-infrared spectroscopy (RT-US/NIRS), Prog. Org. Coat., 55 (2006), 88-96.#15. L. E. Schmidt, Y. Leterrier, H. D. Schma, J. E. Manson, D. James, E. Gustavsson, L. S. Svensson, Conversion analysis of acrylated hyperbranched polymers UV-cured below their ultimate glass transition temperature, J. Appl. Polym. Sci., 104 (2007), 2366-2376.#16. N. Pietschmann, P. Ilse, S. Peter, UV curing of black pigmented coating materials, Eur. Polym. J., 1571(2002), 44-52.#17. L. Macarie, G. Ilia, Influence of pigment properties on UV-curing efficiency, J. Appl. Polym. Sci., 104 (2007), 247-252.#18. T. M. Robert, T. Kwee, T. Y. Lee, C. A. Uymon, C. E. Hoyle, Photopolymerization of pigmented thiol-ene systems, Polymer, 45(2004), 2921-2929.#19. A. Nebioglu, M. D. Soucek, Reaction kinetics and network characterization of UV-curing polyester acrylate inorganic/organic hybrids, Eur. Polym. J., 43(2007), 3325-3336.#20. A. Nebioglu, M. D. Soucek, Investigation of the properties of UV-curing acrylate-terminated unsaturated polyester coatings by utilizing an experimental design methodology, J. Coat. Technol. Res., 4(2007), 425-433.#21. Y. Yin, W. Li, H. Cao, J. Guo, B. Li, S. Li, C. Ouyang, M. Cao, H. Huang, H. Yang, Effects of monomer structure on the morphology of polymer network and the electro-optical property of reverse-mode polymer-stabilized cholesteric texture, J. Appl. Polym. Sci., 111(2009), 1353-1357.#22. R. F. T. Stepto, Polymer networks, Blackie academic & Professional, London, New York, 1998.#23. K. Dusek, M. Duskova-Smrckova, Network structure formation during crosslinking of organic coating systems, Prog. Polym. Sci., 25(2000), 1215-1260.



Article's file
Page view: 3305
Article's download quantity : 414


Article System Login
Introduction

Manager-in-Chief:
Prof. Zahra Ranjbar
Editor-in-Chief:
Dr. Farahnaz Nourmohammadian
Assistant Editor:
Dr. Mozhgan Hosseinnezhad
ISSN:
2008-2134
ISSN (online):
2383-1790
Publisher:
Institute for Color Science and Technology (ICST)

Quick Access
Publications
E-Vote
What is your opinion about the manuscript subscription system of PCCC website?
Excellent
Good
Fair
Poor
Website Statistics
Page view:3,306
Online Visitors:29