2024-03-28T16:08:30Z
https://pccc.icrc.ac.ir/?_action=export&rf=summon&issue=9689
Progress in Color, Colorants and Coatings
Prog. Color Colorants Coat.
2008-2134
2008-2134
2011
4
1
Study of immobilization of nano-TiO2 for environmental aspects on glass by different resin categories
S. M.
Hashemi
K.
Badii
Sh.
Abdolreza
TiO2 and especially its nano-metric structure have many applications for environmental proposes. It can be used in mobilized or immobilized status, but its consumption is less in immobilized form and its process would be economical. In addition, the environmental problems would be minimized. There are a few methods for immobilization of nano-TiO2 inside the process. The sol-gel method is typically applied for immobilization of nano-TiO2 on Pyrex and quartz glasses, but these two glasses are expensive. To reduce the costs, two different resins have been studied for immobilization of nano-TiO2 on conventional low cost glasses, but the glass coating and its surface preparation is very critical in order to increase the stability of catalyst and its life time. In this research, the immobilization process of nano-TiO2 has been studied, and the conditions of process and critical parameters have been delineated. Different experiments have been done to characterize the properties of prepared coating, such as hardness, water resistant, and differential scanning calorimetry (DSC).
Nano
TiO2
Glass coating
Organic resin Inorganic resin
Immobilization
Environmental aspects
2011
02
19
1
6
https://pccc.icrc.ac.ir/article_75780_d2efd9443b706e587e959d1c52a07dee.pdf
Progress in Color, Colorants and Coatings
Prog. Color Colorants Coat.
2008-2134
2008-2134
2011
4
1
Study of Desalination and Changing the Counter Ion of Mono-Chlortriazinyl َReactive Dye on Dyeing Nylon 6.6
A.
Soleimani-Gorgani
J. A.
Taylor
Anionic reactive dyes used to dye nylon suffer from failures due to the poor efficiency caused by low degree of exhaustion and fixation. From the previous work , the dyeing efficiency of Procion Rubine XL on modified nylon was particularly week and hence offers the widest scope for an in depth investigation in to variables that effect the dyeing process. The variables dyeing studies for this process included evaluation the effect of changing the electrolyte concentration as well as the counter ion from sodium to trimethyl ammonium. Consequently reducing the electrolyte concentration and changing the counter ion resulted in reduced fixed colour yield.
Reactive Dyes
Nylon
fixation efficiency
dyeing
trimethyl ammonium
Desalination
2011
05
05
7
14
https://pccc.icrc.ac.ir/article_75775_33dd4d3f9c2db3180c2dc093d95817c8.pdf
Progress in Color, Colorants and Coatings
Prog. Color Colorants Coat.
2008-2134
2008-2134
2011
4
1
Preparation of Water-Based Alkyd/Acrylic Hybrid Resins
A. A.
Yousefi
M.
Pishvaei
A.
Yousefi
Alkyd resins are amongst the most important and widely used resins in coating sectors. In this communication we report on preparation of alkyd resins emulsified by grafted acrylic resins on their fatty acid moieties. Both high-shear mechanical homogenizer and ultra-sonic sonicator were used step-wise to disperse the alkyd resin and acrylic based monomers in aqueous media. The resins are of nanometric particle size (~200nm) dispersed in water in the presence of polymerization emulsifying agent. The FT-IR spectroscopy revealed the differences in the spectrum of the base resins and hybrid resin. The extraction test revealed formation of better than 99% of grafted hybrid resin. The DSC test showed that the glass-transition temperatures of the hybrid resin are very lower than that of the base alkyd and acrylic polymers which re-confirm formation of chemically grafted hybrid resin. The molecular weight of the hybrid resin was also found to be a combination of those of the base resins. The polydispersity of the base resins locates itself around 8, whereas that of the hybrid resin locates around 32 which is resulted from differences in the molecular weight of the base resins. The films of the resulting resins fully dry after 8 hours at room temperature without any further loss in weight or tackiness.
Alkyd
Acrylic
resin
Waterborn
Hybrid Emulsion polymerization
2011
06
09
15
25
https://pccc.icrc.ac.ir/article_75778_2a1b6e5a7880507b448c35bef52fa4ca.pdf
Progress in Color, Colorants and Coatings
Prog. Color Colorants Coat.
2008-2134
2008-2134
2011
4
1
Novel Naphthalimide Based Azo Disperse Dyes for Dyeing of Polyester Fabrics
K.
Gharanjig
F.
Ameri
F.
Sadr Dadras
A.
Khosravi
A series of monoazo disperse dyes based on naphthalimide was synthesized using N-alkylcarboxylic acid-1,8-naphthalimide as diazo component and N,N-diethylaniline derivatives as a coupling components. 4-amino-N-ethanoic (propanoic) acid-1,8-naphthalimide was synthesized from 4-nitro-1,8-naphthalic anhydride by imidation and subsequent reduction reactions. These compounds were diazotized and further coupled to substituted N, N-diethylaniline to produce dyes which give red to violet hues on polyester fabrics. The prepared dyes and their corresponding intermediates were characterized by elemental analysis, DSC, FTIR, 1HNMR and UV-Vis spectroscopic techniques. The dyed polyester fabrics showed moderate light fastnesses, very good to excellent washing, rubbing and sublimation fastnesses.
Disperse dye
polyester
Synthesis
Naphthalimide
Azo dye
2011
07
17
27
37
https://pccc.icrc.ac.ir/article_75774_0210f1bd94dca5810deb938d8f4de8a2.pdf
Progress in Color, Colorants and Coatings
Prog. Color Colorants Coat.
2008-2134
2008-2134
2011
4
1
Spectral Estimation of Printed Colors Using a Scanner, Conventional Color Filters and applying backpropagation Neural Network
S.
Gorji Kandi
Reconstruction the spectral data of color samples using conventional color devices such as a digital camera or scanner is always of interest. Nowadays, multispectral imaging has introduced a feasible method to estimate the spectral reflectance of the images utilizing more than three-channel imaging. The goal of this study is to spectrally characterize a color scanner using a set of conventional color filters. To this end, a 1355 chart was generated and printed; the images of the printed charts were scanned putting a translucent color filter in front of each page during scanning process. Each page was scanned with 4 color filters, including gray, blue, green and yellow ones. A feed-forward Back-Propagation neural network with 12 input neurons of camera responses, one hidden layer containing 20 neurons, and an output layer of 31 neurons of spectral reflectance values was applied. It was shown that it is accurately possible to estimate the spectral data of printed samples from the scanner responses using conventional color filters and the proposed NN with an average GFC value of 0.999. The mean of color difference error was about 0.612 CIEDE2000 (1:1:1) unit or 0.987 CIELAB unit.
Digital scanner
color filter
Spectral reflectance
Printed samples
Multispectral imaging
Neural Network
2011
08
01
39
49
https://pccc.icrc.ac.ir/article_75777_91fa4835da13ebb6be252096cc64f943.pdf
Progress in Color, Colorants and Coatings
Prog. Color Colorants Coat.
2008-2134
2008-2134
2011
4
1
Kinetic investigation of carbon nanotube deposition by DC electrophoretic technique
S.
Rasouli
A. R.
Gardeshzadeh
In this paper, kinetics of DC electrophoretic deposition EPD of carbon nanotubes CNTs is investigated. Carbon nanotubes suspended in pure ethanol with addition of magnesium nitrate was used as deposition media. The effect of main EPD parameters such as deposition time, applied voltage and the CNT concentration on deposit yield was investigated. The variation of current density vs. time and the effect of magnetic stirring were also examined. The results are in good agreement with Hamaker´s law and the deposit yield increases with voltage and CNT concentration but there is a deviation from linear trend in longer deposition times. Stirring could compensate some of this deviation but increases the current density fluctuations.
Deposition kinetics
Carbon nanotubes
Thick film
DC electrophoresis
2011
09
07
51
58
https://pccc.icrc.ac.ir/article_75776_e39b0cb608183150fdc5a523783c2c31.pdf
Progress in Color, Colorants and Coatings
Prog. Color Colorants Coat.
2008-2134
2008-2134
2011
4
1
The Effects of Illuminants and Standard Observers Combination on Relationship between Spectrophotometric Error and Colorimetric Inaccuracy
A.
Shams nateri
The colorimetric error depends on the spectrophotometric inaccuracy. In this paper, a new method is introduced for determining the relationship between spectrophotometric error and colorimetric inaccuracy. The error propagation in colorimetric parameter calculation is evaluated using a linear relation between variance of reflectance spectra and CIE tristimulus values. This linear formula calculates the variance of CIE tristimulus values from the variance of reflectance spectra with sufficient accuracy. In addition, the effect of illuminants and standard colorimetric observers on the error propagation from spectral data into CIE tristimulus values is studied using the proposed relationship. The results indicate that the effect of illuminants is more than the effect of standard observer. In addition, the Standard deviation of CIE tristimulus values depends on their respective coefficients.
Spectrophotometric error
Colorimetric error
Error propagation
Standard Deviation
reflectance
Color
2011
09
16
59
69
https://pccc.icrc.ac.ir/article_75779_3c108fd0044fd1ea37bc5b83a8ea7ebe.pdf